If you're looking to brighten up your kitchen or any other space in your home, Solo Task LED lights offer a flexible and convenient lighting solution. These small, adaptable lights can be used under cabinets, inside closets, or even in art niches. Here’s how to install these innovative lights with ease.
What Makes Solo Task Lights Special?
Solo Task lights are unique because they run off of remote transformers. There are two types of transformers available: electronic and magnetic. The electronic transformer can power the first light up to 20 feet away, but for optimal performance, it’s best to keep it within 4 feet. On the other hand, the magnetic transformer can be placed even farther away without issues.
Both transformers come with their own dimmers, so it's crucial to choose a dimmer that matches your transformer type.
Planning Your Installation
Before you jump into installation, it’s important to plan where your transformer will go. The transformer can be placed under or inside kitchen cabinets, but it should be in a spot that’s both accessible and safe from disturbance.
Tools and Materials Needed
Solo Task LED light fixtures
Remote transformer (electronic or magnetic)
Self-tapping screws
Drill and drill bits
Wire strippers
Screwdriver
Step-By-Step Installation
- Shut Off Power: Before starting, turn off the power at the service panel to ensure safety while working with electrical components.
- Open the Transformer: Carefully remove the screws securing the transformer cover. You’ll find a connector for the incoming line voltage. Feed the line voltage through and tighten the connector to secure it.
- Connect the Wires: Inside the transformer, you’ll see terminals for connecting your wires. Connect the green ground wire, black wire, and white wire to their corresponding terminals. For the secondary side, you’ll notice two red wires—these connect to your LED fixtures without needing to worry about polarity.
- Mount the Transformer: Using the provided screws, mount the transformer securely at your chosen location. Make sure it’s out of sight yet accessible.
- Prepare the Fixtures: Decide where you want to place your fixtures. Measure and mark the exact spots for each light using the recommended spacing of 18 inches between fixtures. Drill Holes and Wire Fixtures. Drill holes for the wires as needed. For each fixture: Strip the wires approximately 3/8 of an inch to expose copper. Insert the wires into the terminal blocks and tighten the screws to secure them.
- Secure the Fixtures: Attach the fixtures to the bottom of the cabinets or your chosen location using screws. Replace any decorative covers by giving them a quarter turn.
- Wire Management: Use adhesive clips to tidy up any excess wire and keep everything looking neat.
- Restore Power and Test the Lights: Go back to your service panel and turn the power back on. Test your new Solo Task lights to ensure everything is working perfectly.
Conclusion
Installing Solo Task LED lights is a simple but effective way to brighten your home. With their versatility and ease of installation, you can enhance your living spaces effortlessly. Whether it’s under cabinets or in closets, these lights are sure to transform any area with warm, inviting illumination. Now that you've got the steps down, it's time to enjoy the beauty of your newly lit spaces!