Product Description:
VST Lighting Switch, Spacer Hand wave Activated Light Dmmer Switch for Closet Light LED Lights and Under Cabinet Lighting with 12V JST Male and Female Connector (DC 12/24V)
About this item:
- [Tip] This switch can be used for both 12V and 24V lamps. If you want to connect a 24V lamp, you need to use the supplied adapter cable.
- [Spacer Hand wave Activated] This sensor adopts good sensitivity detector and integrated circuit. It is activated by hands waving. After correctly connected this sensor with your power supply and LED lights, when you wave your hand at the sensor, the LED lights will turn on automatically, when you wave your hand again, the lights will turn off immediately.
- [Mini Design] Ultra small ! Designed like a cute tiny USB device, with a size of 51x51x7mm, this IR Hand wave sensor switch are totally invisible after being installed, providing a tidy and neat feeling!
- [Installation] You can stick the hand wave senor switch on the surface directly by the double sided adhesive tape or screw it in surface with the clips including. The input and output connector is JST female and male connector. MAKE SURE your power adapter and LED lights connected are with the same type of connectors to be matched. JST male and female both have 25CM and Switch have 2 Meters cable.
- [Wide Application] This IR hand wave sensor switch can be widely used for under cabinet, under shelf, counter, wardrobe, etc. Any places you want.
| Item | IH16 |
| Installation | Hidden Hand wave, Surface Mounted |
| Operation Mode | automatic |
| Contact Type | Normally Open |
| Connector Type | Jst |
| Voltage | 12V/24V |
| Color | Black |
| Terminal | Jst |
| Size | 51x51x7mm |
| Circuit Type | 1-way |
| Actuator Type | Hand Wave |
| Controller Type | Hand Wave" or "Gesture Sensor |