Skip to product information
1 of 6


BT13 3V Battery Powered Strip Lights 4W Modern Under Cabinet Lighting with PIR Motion Sensor for Indoor 6.56ft 6500K

BT13 3V Battery Powered Strip Lights 4W Modern Under Cabinet Lighting with PIR Motion Sensor for Indoor 6.56ft 6500K

Looking for smart under cabinet lighting solutions? Fill the following form. Send message to Get A Free Quote.

Contact form

View full details

About this item

  • 【Dual Mode Optional】2 modes,Auto mode or Man mode. In "Auto" position, the light is controlled by motion(furthest sensing distance:2.5m, sensing time:30s). In "Man" position, it runs by the "ON/OFF",you need to press the button by yourself.
  • 【2 Power Supply Methods】2 power supply methods, 4 AAA batteries(Not included) or USB cable.
  • 【Velcro Tape Installation】Easy and convenient. Use velcro tape for installation,which can be reinstalled and removed freely.The LED strip with 3M adhesive tape allowed you to quickly install wherever you need extra light.
  • 【Wide Application】This product is ideal for stair, tent, bookshelf, baby room, bedroom, kitchen, garage, basement, closet, hallways, entrance, pantry, trunk, etc.
  • 【High Quality Strip Light】With high-quality CE standard LED strip light, high lumen, high CRI,good color consistency, thickened design of FPC circuit board, can carry more current.

Product Description

New Arrivals !


Are you still looking for a portable PIR sensor lighting product?

This PIR Controller comes with a light bar, high-quality lamp beads, and small size. You can put it in any place where you don't need to open a slot,such as cupboard light,closet,cabinets,counters,hutches,work bench,bookcase,shelf,utility rooms,bath,jewelry case,decorative and backlighting etc.

How to work ?


Two Modes

1. Auto/PIR Mode(Auto on when you step to the sensing range,auto off after 30s after you leave.)

Sensing angle:120°

Sensing distance: 2-3m (6.56ft-9.84ft)

It will automatically light up after feeling the human movement , and it will automatically turn off after the person leave. (As shown in FIG)

2.Manual Mode ( Freely control the ON & OFF by pressing the button )

Tip:When it is in Auto Mode, the ON/OFF button is not work.

How to install ?




Step 1

Tear the cover of the Velcro tape on the controller.

(Velcro tape installation, easy to remove)

Step 2

Stick it directly on the board

Step 3

Tear the cover of the strip light





Provide USB Cable (Not included plug)

Connect it with your own charging plug,

so you can power the strip light,

which is economical and recycle.

(No need for batteries)

High Quality Strip

1. Use good LED beads,high lumen,high CRI,

uniform light emission.

2.The strip light is cuttable,you can use the connector or weld it for DIY design.

Safe Touch

Low voltage

Safety can be guaranteed.

Wide Application


Product information

Technical Details

Get A Free Quote